Lifesaver microbiological water filters use ultra filtration (UF) to make contaminated water clean.
Fill your Lifesaver bottle, jerrycan or cube from any water source whilst keeping the tap or lid free of contamination.
Create pressure inside the container by rapidly pushing the pump handle until it reaches sufficient pressure.
When you are ready to drink clean, filtered water, open the jerrycan tap or bottle nozzle.
At LIFESAVER we focus on systems that deliver clean drinking water as defined by the standards of the National Sanitation Foundation and the Environmental Protection Agency.
LIFESAVER products are high performance water filters based on ultra filtration technology. This lets them quickly and thoroughly purify contaminated water to an adapted version of NSF Protocol 231, based on recommendations made by the EPA. LIFESAVER filters are effective against all classes of water-borne disease organisms – parasites, bacteria, viruses and cysts. Minimum removal standards are Log 3 (99.9%) for cysts, Log 4 (99.99%) for viruses and Log 6 (99.9999%) for bacteria. With this level of removal there’s no need for chemical purification, which gives water an unpleasant taste.
LIFESAVER filtration products use air pressure to force water through the filter. The storage tank is a sealed unit which can be pressurised with a built-in hand pump, and this expels water through the cartridge and out the exit nozzle. Contamination is left behind in the filter – and because water is purified only when it’s needed there’s no chance of it being contaminated again.
Our focus is to ensure LIFESAVER® products deliver clean drinking water as specified by the microbiological requirements of the National Sanitation Foundation and The Environmental Protection Agency.
LIFESAVER® products are microbiological water filters which use ultra filtration technology to filter out viruses, bacteria, cysts and parasites from contaminated water sources. LIFESAVER® bottles meet an adaption of NSF Protocol 231 based on recommendations of the U.S. Environmental Protection Agency (EPA). LIFESAVER® bottles filter bacteria to a minimum of Log 6 (99.9999%), Viruses to a minimum of Log 4 (99.99%) and Cysts to a minimum of Log 3 (99.9%).
LIFESAVER® products are sealed units that are pressurised with a hand pump. This pressure forces water through the pores of the filter and out through the exit nozzle leaving microbiological contamination behind.
LIFESAVER's experimental set up and challenge of Lifesaver products is designed to evaluate the filters contaminant removal efficacy. Testing is based on a suitable adaption of NSF/ANSI P231. These units are tested with two different types of water to challenge the filtration capability beyond the standard use. All figures quoted are taken from the stressed challenge phase of the test imitating sewage contaminated water. This stressed test is designed to mimic the unsavoury water that users may have to drink in remote environments with un-developed sewage and waste infrastructure. Users need to know if their water filter still performs using high PH, low temperature turbid water.
> 99.99% (Log 4)
> 99.9999% (Log 6)
> 99.9% (Log 3)
Ultra Filtration (UF)
|Optional activated carbon filter removes chlorine, taste, smell and odour|
ALUMINIUM BARRIER FOIL
Water Vapour transition rate (W.V.T.R): <0.01 gm/m2/24hr – 80 times
LIFESAVER® products filter the following bacteria to a minimum of Log 6 (99.9999%), Viruses to a minimum of Log 4 (99.99%) and Cysts to a minimum of Log 3 (99.9%).
Entamoeba histolytica (dysentry)
Outdoors & Adventure
LIFESAVER® technology is used by expedition companies, explorers, adventurers and preppers for producing clean water in the most unforgiving of environments - where clean water just can't be guaranteed. Used in the field by Rosie Stancer, Max Adventures and the British Exploring Society.
LIFEASVER products can be used in Remote environments, Desert, jungle, glacial environments, Urban environment tap water & Vehicle based expeditions
LIFESAVER® technology answers a global need for clean drinking water. Both for families and communities living without access to clean water and for in-the-field aid workers to use whilst operating in scare clean water areas. LIFESAVER® works directly with NGO's, charities and governments who deploy LIFESAVER® products through their emergency response efforts and planned programmes.
LIFESAVER is used in humanitarian aid for Household use & Emergency response
LIFESAVER® technology has satisfied military requirements for large supplies of clean water in fast-moving operational environments. LIFESAVER® technology provides military personnel with a mobile, lightweight solution, particularly significant for soldiers operating deeper in the field beyond regular base supplies.
If you would like to sell Lifesaver Products in your store, please contact us using the form below:
46 Allira Crescent, Carseldine
Queensland, 4034, Australia.
(07) 3166 9266